Blog

Mouse Ceramic Studio is currently offering firing services to all. We charge $0.04 per cubic inch to fire in a community firing. (Except for members), each time the work is fired, it must be paid for. Measure your piece with an inch ruler or measuring tape, you will need the length, the width, and the height, the length is the longest dimension of your piece (usually) from side to side, the width is usually front to back, and the height is the measurement from top to bottom or how tall it is. Each measurement needs to multiplied by the next so length x width x height. This will give you the cubic inches of the piece; take that amount and multiply by 0.04 to get your dollar amount. For example, a cup with handle that is 6x4x4 is 96 cubic inches; 96 x 0.04 = 3.84 so the total for this mug would be $3.84 per firing or $7.68 for bisque and glaze firing. Members only pay for bisque firings and glaze is included as a courtesy and benefit of membership.

All clays except terra cotta and sculpture are recommended for wheel.

Sand Clay. A finely grogged clay. This clay is beautiful, it looks like wet beach sand when left unglazed with a grainy, speckled surface. The speckles do not show through glazes and underglazes applied over this clay body but it will bring the color of glazes down.
Cone 6 Shrinkage 13.5% Absorption 3.0%

Brooklyn red. Standard 308.
This is one of the most widely used clays in public studios for a reason. It is a brick red stoneware body with fine sand and fine grog. Very resistant to warping and bloating. Yields a beautiful dark reddish brick color and can bring depth and richness to the glazes applied to it.
Cone 6 Shrinkage 12.5% Absorption 2.0%

Dark Brown Clay.
People love this clay because it is so dark. This clay creates major depth and richness in color as it greatly affects the glazes applied over it. The clay is smooth and plastic and good for all